Powder Coating is a contemporary and trendy type of surface finishing that, unlike traditional wet paints, employs a dry manner of coating products or surfaces. The technique consists mostly of placing the powder-coated surface in an oven and heating it until its melting point is reached. In contrast to typical wet paint, the layer it generates is extremely resistant to corrosion, abrasion, and scratches. The finish is also quite stunning and visually appealing.

In addition, an electrostatic coating is applied throughout this procedure. Utilizing tribo or charge guns the powder is actually introduced into the target region. At the bottom of a container with an air cavity, the powder is placed, adhering a preheated coat to the surface to which the powder will be applied.

In addition, surface preparation has a substantial effect on the final finish. Preparing the substrate or layer is essential for producing a high-quality coating. The surface or product to be coated must be devoid of traces of oil, lubricants, and particles of dirt. This is the first step in producing a good and high-quality finish. To prevent an uneven coat, it is vital to properly clean the area and verify that no chemicals or particles are present.

If proper preparation is not performed, the quality of your finish may be compromised. The powders employed in this coating technique are mostly composed of finely ground particles and resin. When heat is given to charged particles, they will stick to the electrically grounded portions of the surface.

The final and most important procedure is curing. This step entails placing the coated object in an infrared cure or convection cure oven and allowing the powders to melt at a temperature of 200 degrees Celsius. Then, place the thing inside for 10 minutes. During this process, powders begin to melt and react with the charged particles, causing them to permanently cling to the substrate.

Powder coating services understands the importance of powder coating metal finishing for a wide range of sectors, including industrial manufacturing, metal fabrication, and automotive components. Machine shops often rely on Rustylions for superior finishing services. For powder coating services, call Rustylions Powder Coating at 1 347 613 8103 or 973 459-8515.